Hotpoint HJA1713 Návod k použití stáhnout pdf (Strana 5)

Installation instructions

Installation

Cooktop

• The cooktop must be set into a worktop between

20 mm and 50 mm deep

• There must be nothing between the cooktop and

the oven (cross rails, brackets, etc.).

• The distance between the lower face of the glass

ceramic hob and the cupboard or separating

panel must be at least 20 mm.

• If the cooktop is to be installed next to a column

unit, leave a distance of at least 100 mm from the

edge of the cooktop to the side of the column

unit.

• Make an opening in the worktop, respecting the

dimensions indicated in the enclosed product

description sheet.

• Apply the supplied gasket to the cooktop (unless

it has already been fitted), after having cleaned its

surface.

Important! In order to prevent the electronic circuits

from overheating, and therefore from being

damaged, we recommend the following:

• Do not install the cooktop near a dishwasher or

washing machine, so that the electronic circuits

do not come into contact with steam or moisture,

which could damage them.

If an hob from our range is installed beneath the

cooktop, make sure that it is equipped with a cooling

system.

If the temperature of the electronic circuits exceeds

the maximum permitted temperature, the cooktop

will switch off automatically; in this case, wait for a

few minutes until the internal temperature of the

electronic circuits reaches a tolerable level, at which

point it will be possible to switch the hob on again.

• Switch the hob off after use.

Rear wall

Front

1 2 3 4 5 6 7 8 9 10 11 12

Žádné komentáře

Hotpoint HJA1713 Návod k použití Strana 5