Hotpoint KID 640 C Návod k použití stáhnout pdf (Strana 9)

EN9

Cooking zone controls and corresponding display

Power management step

Control panel lock/Special function/

Power management step 2 and 4

Power management step

TimerOn/Oﬀ

Switching the hob ON/OFF

To switch the hob on, press the button for approx. 2 seconds until the cooking zone displays light up. To switch off, press the same button until the displays switch

off. All the cooking zones are deactivated.

If the hob has been in use, the residual heat indicator “H” remains lit until the cooking zones have cooled down.

If within 10 seconds of switching on, no function is selected, the hob switches off automatically.

Switching and adjusting cooking zones

Power indicator display

Selected cooking zone indication

Cooking zone positioning

Place the pot on the cooking zone, switching the hob on, activate the required

cooking zone by pressing the corresponding “+” button “0” appears on the display.

It is possible to select the required power level, from min. 0 to max. 9, or booster

“P” if available. To increase the power level, push the “+” button. To decrease the

power level push the “-” button.

Deactivation of cooking zones.

To switch off the cooking zone, press the corresponding “+” and “-” button for more than 3 seconds.

The cooking zone switches off and, if still hot, the letter “H” appears on the zone display.

Control panel lock.

This function locks the controls to prevent accidental activation of the hob. To activate the control panel lock, switch the hob on and press the Lock function button for

three seconds; an acoustic signal and a luminous indicator near the padlock symbol signal activation. The control panel is locked except for the switching off function.

To deactivate the control lock, repeat the activation procedure. The luminous dot goes off and the hob is active again.

The presence of water, liquid spilled from pots or any objects resting on the button below the symbol can accidentally activate or deactivate the control panel lock.

Timer.

The timer can be used to set the cooking time for a maximum of 99 minutes (1 hour and 39 minutes) for all the cooking zones.

Select the cooking zone to be used with the timer, press the timer (see gure) and a beep signals the function. The display shows “00” and the LED indication

comes on. The Timer value can be decreased and increased by keeping the slider function “+” and “-” buttons pressed. When the set time has elapsed,

an acoustic signal sounds and the cooking zone switches off automatically. To deactivate the timer, keep the Timer button pressed for at least 3 seconds.

To set the timer for another zone, repeat the above steps. The timer display always shows the timer for the selected zone or the shortest timer.

To modify or deactivate the timer, press the cooking zone selection button for the timer in question.

Control panel warnings

Residual heat indicator.

The hob is tted with a residual heat indicator for each cooking zone. These indicators alert the user when cooking zones are still hot.

If the display shows , the cooking zone is still hot. If the residual heat indicator of a given cooking zone is lit, that zone can be used, for example, to

keep a dish warm or to melt butter.

When the cooking zone cools down, the display goes off.

Incorrect or missing pot indicator.

If you are using a pot that is not suitable, not correctly positioned or not of the correct dimensions for your induction hob, the message “no pot” will appear

in the display (see gure at side). In these situations it is recommended to reposition the pot on the hob surface until you nd the position of operation. If

no pot is detected within 60 seconds, the hob switches off.

Fast boil function (Booster where it is available).

This function, only present on some cooking zones, makes it possible to exploit the hob’s maximum power (for example to bring water to the boil very quickly).

To activate the function, press the “+” button until “P” appears on the display. After 5 minutes’ use of the booster function, the appliance automatically sets the zone

to level 9.

1 2 3 4 5 6 7 8 9 10 11 12

Komentáře k této Příručce

Žádné komentáře

Hotpoint KID 640 C Návod k použití Strana 9

Komentáře k této Příručce

Související produkty a manuály pro Sporáky Hotpoint KID 640 C