Hotpoint HJA1713 Instalační manuál stáhnout pdf (Strana 6)

6

Assembly

a. If the worktop is made of wood, use the

appropriate brackets, spring clips and screws

provided.

- Position the 4 clips (A) around the cooktop

frame, in the slots provided, see Fig. 1

- Measure the centre of the vertical sides of the

cut out a shown in Fig. 2.

- Position the centre of the brackets (C) on the

centre of the side previously identified.

- The upper edge of the brackets must be flush

with the worktop surface.

- Secure using the 4 screws (B) provided that

should be screwed into the pre-prepared

holes.

- Insert the hob into the pre-prepared hole

ensuring that the clips (A) lodge into the

bracket slots provided (C) (Fig. 4 and 5).

b. If the worktop is made of marble, ceramic,

stone, plastic materials, etc., order the

installation kit, code 4812 310 19277 from an

authorized after-sales service.

Fig. 1

A

Fig. 2

B

Fig. 3

C

Fig. 4

A

Fig. 5

1 2 3 4 5 6 7 8 9 10 11 12

Komentáře k této Příručce

Žádné komentáře