Hotpoint HJA1703 Návod k použití stáhnout pdf (Strana 6)

Electrical connection

Electrical connections

• Regulations require that the appliance be

earthed.

• Connection to the mains must be carried out by a

qualified technician in accordance with the

manufacturer’s instructions and in compliance

with local regulations.

• The installer is responsible for connecting

appliances correctly to the mains and for

observing the safety regulations.

• The hob power cable must be long enough to

connect the built-in appliance to the mains.

• Observance of safety directives requires that a

multi-pole switch with a minimum contact gap of

3 mm be used for the installation.

• Do not use multiple plug adapters or extension

leads.

• After the hob has been installed, the electrical

components must be inaccessible.

Connecting the hob to the power

supply

Note: the yellow/green earth wire must be

connected to the screw with the symbol .

• Strip approx. 70 mm of the cable sheath from the

power supply cable (G).

• Strip approx. 10 mm of sheath from the

conductors. Insert the cable (G) through the

opening in the lid (F).

• Insert the cable into the cable clamp and connect

the conductors to the terminal block as indicated

in the diagram printed on the lid.

• Secure the power cable (G) by means of the cable

clamp.

• Refit the protection lid (F).

• After the electrical connection, fit the hob from

the top and hook it to the fixing springs,

according to the illustration.

WARNING

Make sure that the voltage

indicated on the rating plate is the

same as the mains voltage.

Technical data is given on the

rating plate on the edge of the hob

and also below:

Electrical connection

Supply voltage

Conductors

(number and size)

230 V ~

3 x 2.5 mm

1 2 3 4 5 6 7 8 9 10 11

Komentáře k této Příručce

Žádné komentáře

Hotpoint HJA1703 Návod k použití Strana 6

Komentáře k této Příručce

Související produkty a manuály pro Sporáky Hotpoint HJA1703